led T8 emergency packs

Product Name: Emergency packs

Model Number :BESON-EME7V2-3W

Basic Function:

1. Input voltage range:85~265Vac,Input frequency range:45-65Hz.
2. When the electric supply works normally, the battery is charged from emergency module, meanwhile the electric supply is shift to the output of emergency module and then supply power to the LED lamp ; When the electric supply off, emergency module start emergency power supply function and battery begins to supply power to the LED lamp with limit of max output power. Charging output adopt pulse mode to provide power supply for battery.
3.  Rated power of led lamp is less than 100W,and the load is less than 4w under the emergency condition with battery management function. It is also has over current, short circuit,  battery low-voltage protection and battery low-voltage alarm function. It can be tested by switch whether the emergency function is normal or not when connect the electric supply.
4.  The product is adopted natural transmit heat dissipation, in strict accordance with design requirement, comply with security approved request with good appearance, stable function and high reliability.

Product Specification

Accessories Request

Each emergency pack should be matched with AC power-supply plug wire(one terminal with 4pcs wire),output  plug wire(one terminal with 2pcs wire),indicator light plug wire(one terminal with 6pcs wire, soldering with 3pcs LED indicator light), switch plug wire (one terminal with 2pcs wire),battery module(7.2V/2500mAh one piece battery with one terminal wire , packed separately.  ); each shipment  need enclose one specification and inspection report .

Dimension:Length(L)×Width (W)×Height(H)= 243×40×28.5(unit:mm)(unrecorded tolerance is according to IT12)